How to take measurements for a men's dress uniform: fuller build
Taking your measurements at home is not difficult: just be careful. It is better to measure several times than to make a mistake. Below: what you need, how to stand, where the tape goes and what to write down.
What you need
- A measuring tape.
- A pen and paper.
- A helper: measuring yourself is awkward and less accurate.
Before you start
- Measure over a thin T-shirt (women: in a bra).
- The person measuring stands facing you.
- Stand relaxed: shoulders level, arms down at your sides, feet together.
- The tape lies exactly along the body: not tight, not loose, with no slack or allowance. At the front and at the back it runs parallel to the floor.
- Count from the «0» end of the tape: place the zero carefully at the right point.
Measurement diagram
Each measurement on the diagram has its own code. The key is below, in the same order.

Measurements in order
| Code | Measurement | How to take it |
|---|---|---|
| H | Height | barefoot, standing straight. |
| N | Neck | at the back around the base of the neck, in front just under the Adam's apple. Do not pull the tape tight. |
| S | Shoulder length | from the base of the neck to the shoulder tip. |
| SL | Sleeve length | from the shoulder tip to the wrist. |
| C | Chest | across the shoulder blades and the fullest part of the chest. |
| W | Waist | at the navel. This is the starting point. |
| B | Waistband | where you wear your trousers, along the underwear line. The tape runs under the belly along the underwear line, not around the belly. It is most accurate to measure over trousers that fit you well. |
| Hp-1 | Hips 1 (upper) | check measurement, about 4–5 cm above the main one. |
| Hp | Hips: MAIN | the largest hip girth, feet together. This is the number we record. |
| Hp-2 | Hips 2 (lower) | check measurement, about 4–5 cm below the main one. |
| TL | Trouser length | the tape follows the hip, and where the hip starts to narrow it drops straight down the side to the floor. |
| HD | Head | above the eyebrows, along the line where the cap sits. See the life hack below for an accurate way to do it. |
If you have a belly
Take the waist W at the navel: it is the starting point. Take the waistband B lower, along the underwear line where the trousers sit: the tape runs under the belly. Do not pull your stomach in and do not pull the tape upward. For the hips, find the largest value of the three tapes (Hp-1, Hp, Hp-2) and record the main one.
Head size for a cap: a life hack
Head girth is easy to measure inaccurately. Here is a simple method we recommend to our customers:
- Make a loop from the measuring tape and clip it with a paperclip at your estimated size, for example 57.
- Put the ring on your head the way you would wear the cap: above the eyebrows, along the line where it sits.
- Too tight or too loose? Make the ring larger or smaller and try again. When it sits right, that is your size.

Check yourself
Take the measurements twice and write the results side by side. If the numbers match, send them. If not, check again: place the zero of the tape on the right point again and make sure the tape runs parallel to the floor.
What next
Send us your measurements on Viber or WhatsApp: +38 067 751-24-69. A manager will go through them with you and tell you if anything looks doubtful.